Surly's Ice Cream Truck turns up the volume on fat. With unmatched traction and float courtesy of super wide tires (up to 4.8-inches wide!), and the flickable geometry of your favorite trail bike, this fatty feels frisky, limber, and ready for action. The symmetrically spaced 190mm rear end uses Surly's Modular Dropout system for an array of rear axles choices. 197mm thru-axle? 190mm geared? Singlespeed? All equally plausible possibilities with the Ice Cream Truck. A 44mm headtube provides fork options, and the frameset ships with a suspension-corrected, 150mm fork with a 15mm thru-axle. Surly's proprietary 4130 chromoly steel and corrosion-fighting ED coating add a hefty dose of tough to this bike. Now, where do you want to ride your Ice Cream Truck?
The Sight Carbon is a versatile trail killer, featuring modern all-mountain geometry and suspension kinematics for a fast, stable and playful ride on a wide range of terrain. Balanced climbing and descending capability combined with grin-inducing playfulness and nimble handling make the Sight the ideal accomplice for any aggressive all-mountain rider.
The Surly Pugsley may be the original fat bike, but this one is far from the original. Previously a great all-around fat bike, the Pugsley has been redesigned to be an ideal off-road touring and exploration rig. Surly lengthened the chainstays 12mm for stability when loaded and so your heels float effortlessly past panniers. The tweaked rear rack mounts on the dropouts let you center your rack over the wheel, despite the offset rear triangle. Those dropouts will take a 142 x 12mm thru axle if that's your schtick, but can also be used with 135 x 10mmm QR hubs with Surly's Adapter Washers. Pugsley brings back the 135mm-spaced offset fork, so you can run a front wheel with a spare cog or freewheel as a bail-out option to swap with the rear if your internally-geared hub freezes up in neutral or you smash your derailleur having too much fun. A plethora of three-pack mounts give you gear-hauling options aplenty, so go wild with your build. - 100% Surly 4130 chromoly frame, main triangle is double-butted; 1-1/8" threadless brazed chromoly fork - Four sets of Three-Pack Mounts (two on the fork, two on the downtube), a water bottle mount on the seat tube, and front and rear rack mounts - 142 x 12mm rear dropout (or 135 x 10mm QR with Surly 10/12 Adapter Washers) with Rohloff torque arm slot - 135mm-spaced fork with 17.5mm offset for wheel swappability - 26 x 4.8" tire clearance in frame (with drivetrain restrictions), 26 x 4.3" tire clearance in fork
Norco’s Aurum Carbon 7.1 is here to blast backwoods shuttle runs, laps in the park, and World Cup courses alike. Its super-responsive, lightweight carbon frame uses race-proven geometry to rip corners and maintain stability when tackling some of the nastiest tracks on earth. Norco knows that DH bikes experience some of the roughest riding conditions, so they incorporate Armorlite resin and integrated frame guards throughout to bolster impact resistance, meaning you can focus on taking the fastest line, not necessarily the safest. Norco’s A.R.T. rear suspension with Gravity Tune powers Cane Creek’s insanely adjustable Double Barrel coil shock for a perfect blend of big-hit compliance with pedaling efficiency. Build up the Aurum Carbon 7.1 and get ready for the ride of your life!
The Edict FRD is the pinnacle of Felt’s mountain bike engineering. Featuring Felt’s legendary FAST suspension platform and a no-holds-barred philosophy on frame design, the Edict FRD is the ultimate XC race bike. Its proprietary UHC Ultimate + TeXtreme carbon fiber construction yields the lightest, stiffest frame in the Edict family. Ready to let you build your dream XC mountain bike was built to deliver you to the top of the mountain and the top step of the podium.
Run to the hills. The Rocky Mountain Maiden was designed from the ground up to perform at the highest levels of big-mountain freeriding, World Cup racing, and bike park blasting. Its all-carbon frame pedals efficiently and has increased braking control, while the RIDE-4 provides precise geometry adjustments. For smaller riders and the #26aintdead crowd, our Equalized wheel system allows riders to use 26" wheels without geometry or suspension compromises.
With a pedigree of success on the most aggressive Enduro World Series tracks, the all-carbon Slayer’s descending aptitude and uncanny ability to hold speed in rugged terrain are matched with surprising pedaling efficiency. Predictable and capable, its rate curve provides good support at sag and a moderate ramp toward the end-stroke—perfect for sending bike park laps and big mountain lines. The Slayer Frameset gives you a Fox Float X2 Factory shock to get 165mm of travel, which goes quite well with whatever 170mm fork you choose to add to the frame. Kit it out with some heavy-duty componentry, and you’re on your way to all-trail domination.
The Rocky Mountain Vertex embodies speed and confidence, sitting at the top of the food chain as their flagship XC-race hardtail. Its lightweight SMOOTHWALL Carbon Super Hi Mod frame provides incredible stiffness and speed, while its modern, aggressive geometry inspires confidence everywhere on the race course—even technical corners and descents. Add 100mm of suspension up front along with your fastest components and you’ll soon have a lot of competitors in your dust cloud.
A veritable beast on the trail, Norco's Ithaqua combines fat bike versatility with race bike performance. The lightweight carbon frame features the same responsive Power Chassis as Norco's XC race bikes, but with clearance for tires up to 5” wide. This allows it to float through snowdrifts and over sand dunes alike. Whether you’re racing on groomers or trailblazing through untouched powder, the Ithaqua delivers the full fat experience without the weight.
If you’re like us, your bike needs will likely change by the day, week, month, or year. Surly's Ogre can get you to your job during the week, then way out of town on the weekend. The latest version of the Ogre has received some fantastic updates, including horizontal slotted dropouts with Gnot-Boost spacing, a tweaked non-suspension corrected geometry, and a beefier tire clearance — all in a 29er/27.5+ platform. Ride it any day of the week; it’s not sluggish on pavement or gravel and can also hold its own on singletrack. - Gnot-Boost spacing allows the use of 135mm QR hub, 142 x 12mm thru-axle, or 148 x 12mm Boost hubs. - Full-length Surly Trip Guide housing line guides for derailleurs and brakes - Two sets of bottle cage mounts - Disc and rim brake compatible with removable post cantilever pivots - Upper seatstay threaded barrels with mid- and low-blade fully threaded through-blade fork eyelets - Threaded holes for racks, fenders, and trailer mounting nuts - Rohloff OEM2 axle plate mounting slot - Tire clearance for 29 x 2.5” or 27.5 x 3”
The Ithaqua melds fat bike versatility with race bike performance thanks to a lightweight carbon frame and clearance for 5-inch tires. Whether you're floating over sand dunes or rallying through fresh powder, Ithaqua delivers a snappy ride that gives you the ability to charge and conquer the wildest trails around.
Wednesday is a frame with a decade of Surly's Omniterra design experience distilled into one steel package. Wednesday can ride over the same type of pretty much anything all of their other Omniterra bikes can, but they borrowed elements from both their Trail and Touring categories to create an Omniterra ride that can truly handle anything you want to attempt. Want to point the thing down a mountain and roll those dice? Wednesday has geometry spry enough to get you through the techy stuff, stable enough for the fast stuff, and doesn’t feel sluggish when you have to ride back to the top. It also has the chops for any sort of expedition you may want to undertake. It has plenty of bottle mounts; triple bottle bosses on both fork legs and the down tube; standard bottle mounts on the seat tube and underside of the down tube; plus rack mounts on the frame and fork and fender eyelets on the dropouts, along with barrel bosses on the crown, fork legs and mid-blade, thru-blade eyelets on the fork as well. It also has internal dropper post routing and Surly Trip Guides to manage all the housing and cables on your frame with style. Wednesday also has its very own dropout design as well – a rear-facing, slotted dropout that can use either 10mm or 12mm axles and exit rearward or vertically. They’re cast steel and spaced at 170/177mm. Wednesday gives you a lot of options in the tire clearance category. In the full-forward, short chainstay position you can run 26 x 3.8? tires on 80mm rims and in the full-rearward, longer chainstay position you get the option of 26 x 4.6? tires on an 80mm rim. Wednesday is made out of Surly's own proprietary 4130 CroMoly steel and is ED coated for extra protection from the elements.
The Wednesday is the result of over a decade of Omniterra design experience distilled into one steel package. It can easily ride over or through most anything our other Omniterra bikes can and then some. With the Wednesday Frameset, Surly borrowed elements from some of their Trail and Touring models to create an Omniterra whip that can truly handle anything you want to attempt. Want to point it down the side of mountain? Go ahead, roll those dice. And if you make it to the bottom, you’ll be able to ride back to the top for round two. Wednesday’s geometry is spry enough to get you through techy stuff, stable enough for the fast stuff, and doesn’t feel sluggish on terrain-crawling stuff. While Wednesday is plenty confident on terrifying terrain, it also has the chops for any sort of expedition you may want to undertake. Surly gave it all the necessary braze-ons and mounts for whatever accoutrements you feel necessary in your travels. Racks? Front and rear, friend. Fenders? You got it. Bottle mounts? How does triple bottle bosses on both fork legs and the down tube, and two sets of standard mounts on the main triangle grab you? They even gave Wednesday internal routing for a dropper post and Surly Trip Guides to keep everything nice and neat and free of rat’s nests. In the dropout department, Wednesday uses a cast steel, rear-facing, slotted dropout that can exit either rearward or vertically. They’re compatible with either 10mm or 12mm axles and are spaced at 170/177mm.
The Revolver 7XX1 FS is a featherweight full-suspension cross-country carbon race weapon forged with cross-country performance for efficient power transfer, and Norco's gravity-fueled pedigree for poised bump compliance. Explosive acceleration. Magnetic trail tracking. Shoot first and annihilate your competition—this 27.5-inch Revolver is loaded with powerful potential. Framekit includes a RockShox Monarch RL rear shock, headset, rear thru axle, and seatpost clamp.
Off-road touring can be a zesty enterprise, but it’s not without its perils. Bicycles are simple machines that are extremely efficient, but all simple machines carry along with them the chance of breaking down. This efficiency can get you in trouble if your bike decides to break down far away from the comforts of your parent’s basement. If you’re going to ride your bicycles where no one can see, you better take gear that’s up to the task. Troll is up to the task. Our Troll was once a simple mountain bike frame with a few extras that made it nice for touring. The Troll has evolved into a frame that has been pushed deeper into the category of off-road touring. Its geometry is no longer suspension corrected, which gives it more room for a larger frame bag. We’ve also adorned this frame with our Gnot-Boost spacing, allowing you to use any mountain bike hub whether it be 135mm QR, 12 x 142mm thru-axle, or 12 x 148mm Boost hub. The chainstay yoke has been redesigned to be fully compatible with 26+ tires and the dropouts still allow you to run disc brakes, fenders, a Rohloff hub, and racks simultaneously. It also comes with more braze-ons than you thought possible – there are four triple bottle mounts on the fork alone (don’t get excited, you can only run one Anything Cage per fork leg), as well as two more triple bottle mounts on the down tube. Troll is a bike that has one purpose – and that purpose is to carry you as far away from society as possible. Man has known for eons the call of the indifferent forest. The inexorable march of time, and dumb crap like cell phones, have dulled our senses and made us afraid. Reclaim your animalistic tendencies atop Man’s greatest invention.
Off-road touring can be a zesty enterprise, but it's not without its perils. Bicycles are simple machines that are extremely efficient, but all simple machines carry along with them the chance of breaking down. This efficiency can get you in trouble if your bike decides to break down far away from the comforts of your parent's basement. If you’re going to ride your bicycles where no one can see, you better take gear that's up to the task. Troll is up to the task. Surly's Troll was once a simple mountain bike frame with a few extras that made it nice for touring. The Troll has evolved into a frame that has been pushed deeper into the category of off-road touring. Its geometry is no longer suspension corrected, which gives it more room for a larger frame bag. Surly also adorned this frame with their Gnot-Boost spacing, allowing you to use any mountain bike hub whether it be 135mm QR, 12 x 142mm thru-axle, or 12 x 148mm Boost hub. The chainstay yoke has been redesigned to be fully compatible with 26+ tires and the complete bike comes with the always-comfy Surly Moloko Bar. The dropouts still allow you to run disc brakes, fenders, a Rohloff hub, and racks simultaneously. It also comes with more braze-ons than you thought possible – there are four triple bottle mounts on the fork alone (don't get excited, you can only run one Anything Cage per fork leg), as well as two more triple bottle mounts on the downtube. Troll is a bike that has one purpose – and that purpose is to carry you as far away from society as possible. Man has known for eons the call of the indifferent forest. The inexorable march of time, and dumb things like cell phones, have dulled our senses and made us afraid. Reclaim your animalistic tendencies atop Man's greatest invention.
Want to see what you're capable of? First, you need a bike to get you there. Get started with Norco's Range Carbon 7.3 Framekit. Its lightweight carbon frame is seriously stiff for inspired cornering and wonderful responsiveness, while the 650B wheels increase traction and hold momentum like a 29er, yet are quick, playful and strong like 26-inch hoops. Out back you've got 160mm of Norco's legendary A.R.T suspension so you'll have the confidence and control to barrel into anything full speed. Oh yeah, that's all driven by a Cane Creek Double Barrel shock for maximum trail steeze. The 7.3 framekit has the mount for a front derailleur, so it's all ready to go for 2x or 1x systems.
The Aurum Aluminum offers a DH-proven design in a premium aluminum frame. As the ultimate DH park rig, the Aurum Aluminum will happily churn out park lap after park lap throughout the season. 200mm of front and rear travel deliver excellent suspension performance and will turn the roughest terrains into smooth rides. Originally developed in collaboration with Norco Factory Racing, the bike’s World-Cup racing heritage will also put any passionate downhill racer to the forefront when racing against the clock.
Built with industry-leading carbon fiber technology, including Felt’s own UHC Advanced carbon material for a lightweight and responsive chassis, the Decree 1 frame kit offers you the chance to build your dream trail bike. With 140mm of rear travel and the ultra-efficient FAST suspension system, the Decree 1 is equally adept at leisurely rides on your local trail and taming the roughest singletrack you’ll find anywhere.
The Ice Cream Truck goes where most other bikes can’t. Snow, rocks, mud, sand — you name it, and chances are, someone has ridden it on an Ice Cream Truck. Don’t let that terrain-crawling ability fool you into thinking the Ice Cream Truck is slow and sluggish, though. A long top tube (best paired with a short stem) and short stays make it trail-approved and ready to rip. And with 4.8” tires on 100mm rims, “trail” is relative. Show a snowman who’s boss, ride through a sand castle — all while riding the perfect get-away vehicle. Or you can stick to riding terrain that won’t ruin a child’s day. It all starts with Surly's proprietary ED-coated 4130 CroMoly steel. ED coating provides a solid foundation for paint externally while adding a layer of corrosion protection internally. The Ice Cream Truck’s frame is symmetrically-spaced at 190mm and features Surly's MDS dropout system, so you have the option of running a 197mm thru-axle, 190mm geared or a single speed rear end. Each frameset comes with all three MDS chips so you can choose your own adventure. A 132mm wide PressFit 41 bottom bracket allowed Surly to play with the stays a bit more and move them a little further out, creating a much stiffer rear end. If you feel like swapping out the included suspension-corrected, straight blade fork, you’ll have plenty of options thanks to the Ice Cream Truck’s 44mm headtube. In a world full of uncertainties, there’s one thing you can count on: Ice Cream Truck will really take you places. At least when it comes to riding a bike — it can’t do much to help you fix the rest of your life.
Poise and grace aren't typically used to describe a blazing DH run, but one ride aboard Norco's Aurum might have you stoked about the refined composure of this speed fiend's character. 27.5-inch wheels provide a quick and stable foundation, while precision carbon fiber engineering gives the Aurum's frame loads of stiffness for pinpoint control. Norco chose to design the Aurum around the real-world benefits of a 7-speed cassette, using 142mm rear axle spacing to optimize the chainline and increase heel clearance, while keeping tighter gear ratios for race-winning runs. The Aurum C7.1 Framekit includes a Fox Float X2 Factory rear shock and Norco 142x12 thru axle.
The Range Carbon is the ideal enduro bike, purpose-built to rip downhill with category-bending capability. Available in 27.5 and 29er models, the Range features modern enduro suspension performance and geometry optimized for each wheel size. It climbs efficiently for a big rig, but unleashes its full potential when pointed downhill — delivering confidence-inspiring stability and control for serious speed over technical terrain. Race an enduro, shred gnarly singletrack with friends, or skip the pedaling and do a few laps of the bike park — the Range Carbon is the ultimate accomplice.
Years ago the Karate Monkey helped start the 29” wheel movement and, as time’s gone by, many companies – Surly included – have experimented with even more wheel sizes. With so many different types and sizes of tires now on the market, riders have begun to understand the effect that tire width has on overall wheel diameter, and with ample tire clearance, you can see the benefits of multiple wheel sizes all on one bike. 27+ tires have the same rolling diameter as a 29” wheel, yet you get all the traction and flotation benefits of extra-wide knobbies. And that’s just the tires. The Karate Monkey frame has recently gotten a make over that includes the addition of features like internal dropper post routing, a new tubeset that uses the same trumpet tubes found on our Instigator 2.0, and a slight tweak in geometry that is more progressive and trail-oriented. The Karate Monkey uses a horizontal dropout with a derailleur hanger that features Gnot-Boost spacing, which gives the rider the ability to run any kind of mountain bike hub they choose. 10 x 135mm QR, 12 x 142, or 12 x 148 Boost will all work in the Karate Monkey frame. The frame uses a 44mm headtube for broad fork compatibility and is ED coated for an added layer of internal protection. If, at any point, you decide you want to throw on some skinny meats, standard 29” wheels and tires can be swapped in with no issue. If you want to round-house kick some trail right in the face, the Karate Monkey is your sled.
The Revolver HT is designed for one thing—annihilating your competition. With hair-trigger acceleration, this carbon hardtail translates every ounce of energy into forward motion to blast you ahead of the pack. Surge up climbs and charge through rocky trail with precision. Framekit includes headset, seatpost clamp, and rear thru-axle.
This is the second version of a 650b mountain bike from Ritchey – Tom started to design his first in 1977. Even back then, Tom had a feeling that there was an advantage to the "middle" wheel size, but it took the rest of the cycling world three decades to figure it out: a 650b (or 27.5") wheel provides the bump-eating smoothness of a 29er, with the light, responsive feel of 26" wheels. Finally, the era of the 650b wheel is here. The P-650b is a close relative to the P-29er. Up front there's the proprietary forged-and-machined, gram-shaving integrated head tube featured on all new Ritchey frames. Forged socket dropouts and a new chainstay-mounted rear disc brake mount save a few more grams. And like every frame Ritchey makes, geometry and tubing is carefully fine-tuned by Tom, to bring the legendary balanced, nimble Ritchey feel to 27.5-inch wheels. - Weight: 2,028g for frame (L/17”) - Ritchey forged-and-machined 1.5” tapered head tube - Clearance for up to 2.25-inch tires - Fork: Designed for use with 100mm travel forks - Headset: Integrated 1.5” tapered - Upper bearing: 41.8mm OD / IS42/28.6 (S.H.I.S.) - Lower bearing: 52mm OD / IS52/40 (S.H.I.S.) - Bottom Bracket: 68mm English threaded - Rear spacing: 10x135 - Front derailleur: 28.6 low clamp – top or dual pull - Weight: 2178g / 4.8 lbs (M/17”, frame only)
Few can claim to have played a bigger role in the evolution of the mountain bike than Tom Ritchey. And he's still at it. The original Timberwolf debuted in 1984 as Tom's answer to the growing demand for a mountain bike that could handle more of anything. Reborn 30 years later, the Timberwolf is a hardtail incarnation of an all-mountain trail bike that can shred anything you throw at it. Designed around 650B wheels, the Timberwolf is agile and fluid whether bushwacking the mountainside or carving single track. It's the bike you won't be able to stop riding. - Optimized for 140mm-travel fork - Geometry measured at 105mm (140mm fork with 25% sag) - Designed for use with travel-adjustable forks - Forged and machined tapered head tube—lighter than standard integrated designs - Trail specific geometry to handle a more aggressive terrain and riding - Headset: Integrated 1.5" tapered - Upper bearing: 41.8mm OD / IS42/28.6 (S.H.I.S.) - Lower bearing: 52mm OD / IS52/40 (S.H.I.S.) - Rear dropout convertible between 142 x 12mm and Standard QR versions (ships with 142 x 12 + axle) - 30.9 seat tube with internal dropper post routing - Fits tires up to 2.4" - Weight: 2410g / 5.31 lbs (S/15", frame only)
The Revolver 9XX1 HT 29er is designed for one thing—annihilating your competition. With hair-trigger acceleration, this carbon hardtail frame translates every ounce of energy into forward motion to blast you ahead of the pack. Surge up climbs and charge through rocky trail with precision—this Revolver is loaded with powerful potential. Framekit includes headset, seatpost clamp, and rear thru axle.
The Revolver 7 SL from Norco is always ready to punch in and take care of business. Its feathery, stiff, and oh-so-responsive high-modulus carbon frame lets you float up hills, rip corners, and mash it to the line against the best of them. It's oversize tapered head tube is optimized for a 100mm fork and the PF30 bottom bracket delivers all your power to the rear wheel. And, 27.5-inch wheels make it playful, maneuverable, and outright fun to ride. Looking for the ultimate XC business partner? Look no further.
It doesn't have to be all work or all play. See things differently on board Norco's Optic Carbon 7.1 frame. Buff singletrack? A forest of off-camber roots? Punchy climbs and smooth descents? Yes, yes, and yes; all things are possible with 120mm of dialed A.R.T. suspension with a Fox Float Factory EVOL rear shock. The super smooth carbon and low frame weight don't hurt either. Add your favorite 27.5-inch wheels and ride trails in ways you never thought possible. Boost rear spacing keeps thing stiff, fast, and fun. There's a host of details that make the Optic even more trail-ready; with fully sealed internal cable and housing routing, and Norco's SmoothCore PressFit BB92 bottom bracket interface, you can enjoy the ride, not worry about maintenance. And, the frame features an optional front derailleur mount so you can set up your preferred drivetrain.
Norco's 100mm Revolver full suspension is the ultimate XC Race weapon. The stiff, feather-light carbon frame will have you surging up climbs, while racer-approved Gravity Tune geometry ensures the bike and rider are poised and confident on descents. With kinematics optimized for cross-country racing and A.R.T. suspension, the Revolver delivers maximum pedaling efficiency and predictable, stable support when the course gets chunky. The all-new Revolver FS has what it takes to win – you supply the heart.