Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Cranksets

Shimano Dura-Ace 9100 11-Speed Crankset
$624.99
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Shimano Dura-Ace Track Crank
$474.99
Shimano's Dura-Ace Track Cranks transform every last watt into oval-scorching speed in the velodrome. These cranks set the bar for low weight and unmatched efficiency, with hollow forged aluminum crank arms and an Octalink bottom bracket (sold separately) for power transfer and acceleration that will blow you, and those trying to hold your wheel, away.
Shimano Dura-Ace R9100 Left Crank Arm
$232.00
Shimano's R9100 series crank arm achieves the ultimate in optimal power transfer. It does this through a broad Hollowtech II arm which sets the highest standards for stiffness and lightness. - Spindle Interface Type: Hollowtech II
Shimano XTR Hollowtech II M9100-2 Crankset
$617.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Double front chainring set up - Combines wide range and close gear steps - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups
Shimano Deore XT Crank (Double)
$230.99 - $234.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm
Shimano Deore XT Hollowtech II Boost Crankset
$234.99
Ride anywhere 11-speed rider tuned gearing. The power to choose how and where you ride. Consistent shifting performance and enhanced chain management. Optimal balance of durability and lightweight. High efficient and precise shifting. These cranks are Boost compatible. - Enhanced chain retention. - Better sealing and better rotation. - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - 4-Arm Chainrings : x - Chainring Sizes : 38-28T, 36-26T, 34-24T - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arm Length : 170mm/175mm - Chain Line : 51.8mm - BB Shell Width : 68, 73mm
SRAM RED AXS Quarq Road Powermeter DUB
$1,200.00
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
Shimano Dura-Ace 9000 Left Crank Arm
$241.00
Shimano Dura-Ace Left Crank Arm. - Spindle Interface Type: Hollowtech II
FSA Gossamer Pro ABS Double Crankset
$178.00
Not ready for carbon? The Gossamer is a high-end crankset for alloy lovers. With an impressive history of wins on the brutal cobbles of Paris-Roubaix, it needs no further introduction—yet the details shouldn't be ignored. The cold-forged aluminum arms are heavily scalloped for the maximum strength-to-weight ratio, and the versatile BB368EVO spindle is forged from an even stronger material. The 30mm BB386 EVO spindle is compatible with virtually every frame standard available by choosing the appropriate BB. The chainrings are CNC-machined from still-tougher 7075 aluminum, then recess-machined and pinned for rapid precise shifting. Boosting overall stiffness our ABS system—Asymmetric Bolt Spacing—with the chainring bolts strategically spaced to provide optimum strength from a 110mm BCD. - Cold-forged AL6061/T6 aluminum crank arms - Forged AL7050 BB386EVO spindle - AL7075 100% CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
Origin8 Alloy Crankarm Set
$81.99
Put the power down with Origin-8's Alloy Crankarm Set. Made of light and durable forged aluminum and for a single chainring and square-taper bottom bracket (both sold separately), these crankarms are great for your sweet urban rig or mountain bike.
Shimano ZEE Crankset
$134.99
Super strong and ultra durable, Shimano's ZEE Cranks are tailor-made for aggressive riders, DHers and dirt jumpers that don't have endorsement deals. They use a 2-piece design with solid aluminum arms as well as a steel axle and steel pedal inserts for longevity. Stiffness was put at a premium, so if you need to stomp on the pedals to get up to speed quickly, or if you're a Clydesdale who punishes lesser cranksets, ZEE has your back. It's 10-speed compatible and is equipped with a 36-tooth chainring. The bottom bracket is included, too.
CULT Hawk V2 BMX Crank
$159.99
The Hawk 22mm cranks are fully heat-treated and feature 4130 chromoly crank arms made with custom forged tubing, investment cast oversize spindle bosses, and a wraparound spindle gusset for increased strength and rigidity. A 22mm hollow chromoly spindle and hollow chromoly spindle bolts helps shed weight without sacrificing strength. - RHD/LHD compatible - Bore: 22 - Spindle Material: Steel - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No
SR Suntour XCT Jr. Crankset
$30.00
Youth sized 9-speed, triple crankset with melt-forged crank arms intended to be used with square taper bottom brackets. - Alloy crank arms - Steel chain rings - 50mm chain line with a 113mm spindle - Integrated chain guard - Number of Chainrings: Triple - Chainline/Hub Compatibility: 135/142 MTB Hubs - Spindle Interface Type: Square Taper JIS - Chainring BCD: 104, 64 - Pedal Spindle: 9/16" - Crank Intended Use: Mountain - Rings: 44/32/22 - Drivetrain Speeds: 9 - BB Included: No
Shimano RS510 Crankset
$154.99
The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget. - For 11-speed drivetrains - Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length - Affordable and high-end style crankset
Shimano Saint Crankset
$334.99
Big air, pure speed, and total concentration: the DH world in a nutshell. It's a world where line choices are made in the blink of an eye, absolute faith in your gear is a must, and Shimano's Saint Crankset is ready to answer the call every time. Ultra-wide bottom bracket bearing spacing and hollow-forged crank arms are used for maximum rigidity and strength under demanding conditions, and a steel pedal insert adds even more burl. A single chainring keeps things simple and durable up front so you can focus on the ride, and not a dropped chain. See you at the bottom. - English threaded Shimano Hollowtech II BB included
Sunlite Alloy Triple MTB
$39.39
- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline - Spindle Type: 120 SQR JIS
Sunlite Alloy Triple City
$39.39
- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline
Campagnolo Super Record 12x2 Speed Crankset
$995.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Campagnolo Chorus 12-Speed Crankset
$408.00
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
Campagnolo H11 Crankset
$720.00
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Campagnolo Record 12x2 Speed Crankset
$555.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Sunlite One-Piece Crankarm
$12.99 - $20.99
- Forged steel - 24 TPI
Race Face Next R CINCH Crank Arm Set
$419.99
Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells
SRAM S600 3.0 Crankset (42/32/22)
$45.00 - $48.00
SRAM's S600 3.0 Crankset features forged arms for increased strength and reliability paired with smooth shifting chainrings for the best combination of looks, performance and price.
SRAM SX Eagle Crankset
$94.00
The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately
FSA Omega MegaExo Crankset
$138.00
The Omega crankset is where fashion meets function, combining sleek styling with robust industrial design elements. Updated 11-speed compatibility puts the latest shifting technology into an attractive, price-conscious crankset. - Die-cast aluminum crank arms are lightweight and durable - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Pedal Spindle: 9/16" - Chainline/Hub Compatibility: 130 Hubs - Rings: 50/34 - Spindle Interface Type: FSA MegaExo 19 - Chainring BCD: 120, 90 - Bottom Bracket Included: No
FSA SL-K Modular BB386EVO Crankset
$347.99
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and BCD 90 inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
Sunlite Steel Crankarm
$20.99
• One-piece • 170mm • 24 TPI
Sunlite Cotterless Unicycle Crankarm
$16.99
• Forged steel • Square taper • Compatible with 9/16" pedals • Pairs • Cotterless
SRAM RED Crankset
$690.00
The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon
Page 1 of 3 Next page