Front

The new Super Record 12x2 Speed mechanical front derailleur: lightness, design, fluidity, and effectiveness. The new Super Record 12x2 Speed mechanical front derailleur introduces many new techniques, starting with the leverage systems designed to speed up derailings. Less effort is needed to shift owing to the split front connecting rod, which prevents contact with the travel limit screw. Whilst the shape of the inner cage plate is engineered to guarantee maximum readiness for upshifting, the external monolith body in carbon fiber has been shaped to enhance the efficiency of the chain movement when going uphill and the readiness and fluidity in descent. The aesthetic impact of the component is consistent with the rest of the Super Record groupset due to the use of unidirectional carbon fiber and titanium stop screws. Micro-adjustments to the front derailleur position, which can be activated by the controls, help to prevent any contact with the chain, even in the case of maximum crossover. As regards compatibility, the new Super Record 12x2 Speed front derailleur allows the use of hoods measuring up to 32 mm thanks to the new upper connector rod and the double fixing position of the control cable.

Campagnolo's EPS Chorus Front Derailleur is made with a featherweight carbon fiber body for an unbeatable stiffness to weight ratio. The high torque, high drive motor is made in Switzerland to ensure the ultimate in shifting precision and reliability. Plus, the cage sports a special surface treatment for added stiffness and durability. - EPS Electronic Power Shift electronic front derailleur. This front derailleur requires specific, separate EPS wire harness, battery pack, and shifters - Monolithic technopolymer, carbon fiber body for the best stiffness and weight possible - Features an alloy outer cage, steel motor and gear housing - Waterproof, high over torque motor-gear box creates solid, ultra fast, under load front shifts - Automatic re-positioning/trim depending on the rear cog selected - Ride Setting allows returning home in the inner chainring should battery power fall - Rings: Double - Speed: 11 - Derailleur Capacity: 16 - Min/Max: 34/55 teeth - Weight: 149g

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

SRAM's low-profile GX 2x11 front derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams

SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.

• Covers the unused high-mount front derailleur mount on 1x-equipped bikes • Black anodized aluminum

Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load.

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load.

- Replacement backplates for MRP chainguides - Medium angle backplate models offer clearance for low chainstay frames such as VPP

- Correct fitment of larger 31.8Mm front derailleur to 28.6Mm seat tubes

- Model Number: FD-R3030 - Series: SORA - Top Gear Teeth: 50T - Chain Stay Angle: 63-66 - Chain Line: 45 - Models: Braze-on and band clamp available - Band clamp model includes shims for 31.8/28.6mm seat tubes

- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergnomical Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - New Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Top Gear Teeth: 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm

Features: - Smooth shifting and less cadence shock - Close step (10T) - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed

FD-A073 Tourney Front Derailleur for 2x7 or 3x7 drivetrains. - SG-X chainring compatible - Quick assembly - Interchangeable with SHIMANO road 7-speed system - Easy adjusting - Light operation and smooth shifting

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

Shimano FD-M2000 front derailleurs feature Mega Lite and HyperGlide technologies for smooth and easy operation. They're a perfect replacement for your 3 x 9 drivetrain.

Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter

Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force

The Shimano GRX RX815 Di2 front derailleur delivers quick and smooth front shifting even under high pedaling torque. It's designed for a wider, 17T front chainring range, has programmed chain guide trim settings, and can be used in full or semi Shimano Synchronized Shift modes. - Chainline +2.5 mm vs. conventional road FD - Wide, 17T front range chainring range - Wider tire clearance

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear. This model is specifically optimized for 2x10 set ups. Plus, the body boasts wide parallel pivots that provide fast, smooth and reliable shifts every time.

Shimano's Deore Front Derailleur delivers smooth shifting and less cadence shock along with top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. You'll get stable performance, even with full suspension MTB, as it shifts properly while the rear suspension handles rough trails and obstacles. - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - Close step (10T) - Efficient cable routing - OPTISLICK cable - Swing Action: side swing - Top Gear Teeth: 40-42T - Chain Line: 50 - Chain Stay Angle: 66-69

Shimano's Alivio Front Derailleur features wide pivots and a rigid cage for fast shifting and trail-worthy durability. This 9-speed compatible derailleur also gives you clearance for mud guards or wide tires.

The Shimano GRX RX-810-F front derailleur offers lighter front shifting operation and easier setup thanks to the new link construction and integrated cable tensioner. It features a 2.5mm outboard chain line design to allow wider tire clearance for mixed-terrain riding. The RX-810-F also accommodates a 17T front chainring range for wider gearing options. - Ergonomic power curve - Integrated cable tension adjustment - Natural stroke feeling - Chainline +2.5 mm vs. conventional road FD - 17T front range - More cable routing options - Lighter front shifting - Wider tire clearance - Wider range front gearing - Precise and easy front derailleur adjustment

• Alloy cage with titanium hardware offers light and durable performance • Side-swing design better accomodates more suspension designs and an additional 15mm of tire clearance • Increased pull strength provides faster shifting • 48.8mm Chainline Top Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Bottom • Front Derailleur Clamp: E-Type • Front Derailleur Style: Topswing • Max Ring (teeth): 38 teeth Side Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: E-Type • Front Derailleur Style: Side Swing • Max Ring (teeth): 38 teeth • Max Ring (teeth): 38 teeth Side Swing, Triple • Derailleur Capacity: 18 • Double or Triple: Triple • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: E-Type • Front Derailleur Style: Side Swing • Max Ring (teeth): 40 teeth

The Shimano Acera FD-T3000-2-TS3 front derailleur provides smooth, precise shifting for mountain bikes using a 2x9 speed drivetrain. - Precise and reliable shifting - Pre-assembled clamp band and inner cable fixing bolt - Smooth and accurate front shifting - Quick and easy installation - Total capacity: 16T

Compatible with DUAL SIS index shifting, the Shimano Tourney TY front derailleur is perfect for 3x7 and 3x6 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 63-66 - Top gear teeth: 48T - Total capacity: 20T

The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options

• Wider clearance for large wheels • Compatible with shorter chain stays • Efficient cable routing for light shift operation • Increased traction range for long-travel and active rear suspension • Model Number : FD-M8020 • Series : DEORE XT • Swing Action : Side Swing • Cassette Compatibility : 11 • Maximum Capacity : Total capacity 10T • Top Gear Teeth : 34-38T • Cable Routing : Front-Pull • Chain Line : 48.8 • Chain Stay Angle : 66-69 • BB Mounting Plate : High Clamp

The new CX Single Ring Chain Guide is designed to prevent your chain from dropping off single-ring setups and built strong enough to endure brutal conditions of cyclocross. Specifically designed to be used in combination with SRAM CX1 and other single-ring setups. The lightweight aluminum cage limits lateral movement of the chain, the leading cause of chain derailment, adding high-end K-Edge quality insurance to your CX bike. Key Features and Benefits: - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains Attributes (specs): - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded