Wheels

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum Not compatible with RS-1 fork

- Anodized aluminum - 50 nipples per bag - 12mm length

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 130mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 141mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 9.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

- Position Front - Wheel Diameter/ISO 26'' / 559 - Axle Type 15mm TA - Hub Spacing 150mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 94mm - Rim inner width range 45mm+ - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D201SB - Wheel Weight 1550g - Spoke Type Stainless Black - Valve Presta - Rim External Width - - Depth 20mm - Rim Model Evo JP96 - Skewers Included No

- Mid Fat, and Fat Race are what this thing is all about - Perfect for sand, snow, trail, and everything in between - Double wall for increased stiffness and tubeless ready - 45mm width disc-only rim

- M-Pulse front axles incorporate drive-side end cap and rear axles the non-drive side end cap - Neo OS axles are steel and compatible with standard Neo hubs for riders looking for a steel option - Instructions and hub axle determinations are available

Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.

Replacement end caps for Stan's NoTubes 3.30HD 150mm rear hubs.

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

Original equipment freehub bodies to fit SRAM hubs and wheels.

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

- SRAM, X9, Freehub Body, 11.2015.028.100

Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.

Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 has been redesigned to take full advantage of the benefits carbon fiber has to offer, and feature a generous 31mm internal width for modern tire widths with lower pressures. Lace these rims to your favorite hub, and you’ve got a world-class wheelset ready for action.

Replacement Freehub Body for Trace hubs.