Forks

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

RockShox's Pike RCT3 Solo Air is the ultimate fork for all-mountain and enduro riding. Burly 35mm stanchions, magnesium lowers, and a lightweight hollow forged aluminum crown deliver supreme stiffness to rip down the toughest enduro courses. When the bumps come hard and fast, RockShox's Charger damper keeps the fork high in the travel to maintain proper bike geometry, all while soaking up everything from flowy dirt ribbons to crazy rock-strewn goat paths. The RCT3 three-position switch changes between full travel, lockout and threshold modes so you can save your legs on a transition stage and open it up to pin the next timed downhill.

- Replacement leg guards for Dorado forks

Frame bumper stops from RockShox.

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 185mm steerer length • Threaded fork • Compatible with 20-inch wheels

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Axle-to-Crown: 365mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 120mm - Steerer Length: 200mm - Steerer Size: 1-inch

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 200mm - Brake Mount: Caliper - Axle-to-Crown: 395mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 100mm

Economically priced hi-tensile steel MTB fork for 26-inch wheels. - Steerer Type: Threaded Steerer - Size: 1" (7/8 ID) - Steerer Length: 198mm - Rake: 45mm - Axle-to-Crown: 393mm - Race Diameter: 27mm - Axle: 3/8" - Thread Length: 95mm

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 137mm - Brake Mount: Caliper - Rake: 35mm - Axle-to-Crown: 315mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 40mm

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

- Brake mounts: Caliper - Construction: Hi-tensile steel - Rake: 50mm - Type: LW - Steerer type: Threaded - Race diameter: 27mm - Axle: 3/8'inch

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 180mm

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels

• High-tensile steel construction • Threadless

- Cantilever brake mounts - High-tensile steel construction - Threadless fork - Steerer diameter: 1 1/8-inch - Steerer length: 260mm - For bikes with 26-inch wheels

- Cantilever brake mounts - 45mm rake - Hi-tensile steel construction - Steerer Type: Threaded - Steerer Size: 1-inch - Brake Mount: Cantilever - Rake: 45mm - Axle-to-Crown: 405mm - Thread Length: 120mm - Axle: QR 9mm

• Cantilever brake mounts • 45mm rake • High-tensile steel construction • Threaded fork

Ideal if you are looking for a rigid 26" dirt jump fork that won't break the bank - CrMo steerer with oversized 31.8mm diameter plain gauge CrMo legs - 51mm International Standard disc brake mounts - 9.5mm (standard QR) safety dropouts - 1-1/8" 2-piece welded steerer/crown

- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"

Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Weight: 692g - Wheel Size: 700c

• Caliper brake mounts • 385mm axle-to-crown • Chromoly construction • 1-inch steerer diameter • Threaded fork

• Cantilever brake mounts • 45mm rake • Chromoly construction • 1 1/8-inch steerer diameter • Threadless fork

- Replacement damper kits

- Hi-Tensile steel construction - 135mm fat tire front hub spacing - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Steerer Length: 275mm - Brake Mount: Is Disc - Rake: 45mm - Axle-to-Crown: 450mm - Race Diameter: 30mm - Axle: QR 9mm

• High-tensile steel construction • Springer suspension • Threaded • 1-inch diameter (7/8-inch inner diameter) • 20-inch version steerer length: 148mm • 26-inch version steerer length: 180mm

• Cantilever brake mounts • Chromoly construction • Threaded fork • For 26-inch wheels • 200mm steerer length