Pumps/Inflation

Topeak's Turbo Morph G is super portable so it can be carried on all your rides, yet still offers the pumping power of a good floor pump thanks to a padded T-handle, a long hose, a fold-out base to stand on, and a high-volume aluminum barrel with built-in gauge. A frame mount is included, too.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Pocket Drive is an amazingly compact and lightweight bicycle hand pump featuring plenty of pumping efficiency. It's constructed from durable CNC machined aluminum and has a handle that's lightly knurled for slip-resistant operation. With its overlapping handle and integrated ABS Flex Hose, the Pocket Drive offers performance unmatched for its size. The pump is Presta and Schrader valve compatible, and it's completely rebuildable for continued use at a high level. - 140mm, 79g - 160 psi, 11 bar - CNC machined aluminum construction with compact overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes Composite Matrix frame mount

The most compact, lightweight Dual Action pump with gauge that road riders can fit anywhere. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires to 120psi / 8bar. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta with integrated dust cap - Barrel/Thumb Lock: Aluminum - Handle: Polymer - Capacity: 120psi / 8bar, 1-1/8” Analog - Volume Per Stroke: 36 cc (pull + push) - Added Features: Dual action pumping head - Side mount bracket - Size: 21.8 x 3.4 x 3.1cm / 8.6” x 1.3” x 1.2” - Weight: 116g / 4.09oz

A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.

The AirStream Inflator (INF-200) is MSW's ultra-small, minimalist compressed-air inflation device, featuring easy twist-on / twist-off operation and cartridge storage threads. - Composite body with alloy head - Plug to keep the cartridge interface clean - Simple twist on/off operation

The Rennkompressor is the sole legitimate ancestor of all floor pumps on the market today and has been produced for over 50 years at the SKS factory. The Rennkompressor is known around the world as a long-lasting, excelling performing pump. The pump features a steel tube, iron base, and wooden handle. The pump is fitted with an MV Easy Valve head for use with all valve types, but other head/hose combinations are available. - Inflates to 16 bar / 230 psi - Compatible with Presta, Schrader, and Dunlop Valves - Replacement/rebuild parts are available - 254 cc of air volume per stroke - Height: 650mm - Made in Germany

Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.

Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Origin-8's Pro Pulsion 2-Stage Gauge Pump features a large, telescoping barrel that inflates tires quickly, and a reversible Presta/Schrader valve head. Dial in your pressures with the precision in-line gauge. And, you'll love the great, ergonomic T-handle and convenient mounting bracket.

Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.

Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)

Prestacycle Alloy CO2 Pump is NOT a complete pump. Roughly the size of a CO2 cartridge and much lighter weight, this is your LAST CO2 cartridge. Simply attach it to your CO2 head, open the valve and pump! Eliminate CO2 range anxiety without having to carry a whole pump. If you use CO2, another pump head would be redundant. Capable of reaching 120+ psi, this is not the fastest pump, but a whole lot faster than walking. CO2 head required, not included. - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED - Presta ONLY. Most CO2 Heads only work on Schrader valves with high Cartridge pressure. Features: The ENDLESS spare CO2 Cartridge! The Prestacycle Alloy CO2 pump is the end of CO2 range anxiety. CO2 is great for fast, high pressure fill-ups, however, when you’re out, you’re out of luck! You can carry as many Cartridges as you think you need, now your last one can be endless. Same space as a cartridge, but lighter. CO2pump takes about the same space as a cartridge, but weighs only 35 grams. Unlike pumps, why waste space and weight to carry a pump head? Your CO2 Head is already a pump head with CO2pump. Although small, CO2pump is engineered to service high pressure. We designed a tiny pump with a compression ratio that enables you to reach 120psi without straining. With our design, smaller simply means more strokes, not a lack of pressure. Compatible with most brands of CO2 Heads*. Got a favorite CO2 Head? Already own one? CO2pump works great with most Heads. Simply attach the pump like a cartridge, open the valve and start pumping. *If your Head is a push-to-inflate head, you will need to hold the “push” action open while pumping. CO2pump is so much faster – than walking. No matter what goes wrong, inflation will not be the problem that keeps you flat. CO2pump will get you back on the road. Specifications: - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED Disclaimers CO2 Head required, not included. Compatible with most brands of CO2 Heads. Note: push to inflate heads need to be held in the inflate position while pumping.

Lezyne's Micro Floor Drive HPG is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose with an inline pressure gauge and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

Lezyne's Micro Floor Drive HP is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.

The Lezyne Digital Pressure Drive takes the guesswork out of pressurizing tires with an easy-to-read digital gauge. This compact system is durable and lightweight thanks to its aluminum construction, and capable of delivering up to 120 psi through a Presta/Schrader-compatible ABS Flex Hose.

350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.

Compact and super-efficient high-volume bike hand pump featuring a knurled barrel for superior grip while pumping. Its proven engineered design with an overlapping handle is constructed from machined aluminum, with superior durability, minimal weight, and all of the style. The integrated ABS Flex Hose is Presta and Schrader valve compatible and greatly improves pumping action and ergonomics. This mini pump is completely rebuildable and made with the best materials available. With up to 90 PSI (6.2 BAR) of pumping power, the Grip Drive HV is excellent for all-mountain bikes and gravel bikes. Includes a lightweight Composite Matrix frame mount. - Max pressure: 90 PSI | 6.2 BAR - Small: 186mm | 119g - Medium: 231mm | 134g

The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges the coil hose to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31". The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. FEATURES: – Thermal Overload Protector – Shop-Style Inflator with 120 PSI Gauge – 120 PSI Pressure Gauge with Rubber Boot – Fully Rebuildable Presta Head Attachment – 90° Twist-on Schrader Attachment – 30ft. Inside Braided Coil Hose – 2-Pin SAE Connection with Battery Terminal and Clamp Options – Deluxe Carry Bag SPECIFICATIONS: – 12-Volt – Permanent Magnetic Motor – Duty Cycle: 30 min. @ 30 PSI – Max. Working Pressure: 120 PSI – Max. Amp Draw: 23-Amps – Ingress Protection Rating: IP54 – Dimensions: 6.8?L x 3.7?W x 6.5?H – Net Weight: 5.75 lbs. – Power Cord Length: 6ft.

Lezyne Pump Parts

Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2 - Unable to ship to Canada

Crank Brother's Klic HV features a revolutionary design that sports a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-volume portable hand pump with hidden magnetic hose - Premium pump with flexible rubber hose to allow for easy inflation. - Features include a Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HV (high volume) version recommended for tires 1.8” wide and larger. - All Klic pumps come with a bottle cage bracket mount. - Length: 220mm - Pressure 110psi / 7.6bar - Weight: 124 grams

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 

Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty

The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz)  - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty